To Next PageTo Next PageWhy does the main fuse or breaker blow in my Fri-Jado TG50 H?
If the main fuse or breaker blows in your Fri-Jado Oven, it could be due to several reasons. First, check the wiring connections to ensure they are correct. A shorted heating element, drive motor, blower, or magnetic switch might also be the cause, in which case you should inspect and replace any faulty components. Finally, examine the wiring for any shorts.
Why does the Fri-Jado TG50 H Oven temperature differ from the temperature setting?
If your Fri-Jado Oven temperature differs from the set temperature, start by verifying the line voltage. If the voltage is correct, the thermostat might be malfunctioning and require replacement. Additionally, inspect and replace any inoperative blower motors. Lastly, ensure the fan guard and fan blades are clean.
What to do if the drive motor does not run in my Fri-Jado TG50 H?
If the drive motor in your Fri-Jado Oven does not run, there are several potential causes. First, replace the main fuse if it's inoperative. If the fuse is fine, the capacitor might be malfunctioning and need replacement. You should also inspect and replace the motor if it's faulty, check and replace the main switch if necessary, and examine and replace the timer switch if it's not working. Finally, ensure all wiring connections are tight.
Why doesn't the Fri-Jado Oven temperature reach the desired temperature?
If your Fri-Jado Oven temperature does not reach the desired level, there could be a few reasons. A malfunctioning thermostat might be the culprit, requiring replacement. Inspect and replace any inoperative heaters. Also, verify that the voltage line is correct.
How to troubleshoot a blower motor that doesn't run in a Fri-Jado Oven?
If the blower motor in your Fri-Jado Oven isn't running, start by replacing the capacitor. Ensure all wiring connections are tightened. If the motor is inoperative, inspect and replace it.
What to do if all heating elements are out in my Fri-Jado Oven?
If all heating elements are out, but one quartz lamp and the blowers operate while the oven cavity is below the set temperature in your Fri-Jado Oven, it could be due to a few reasons. The thermostat might be malfunctioning (open) and need replacement. Inspect and replace the contactor if it's inoperative. Also, ensure all wiring connections are tightened.
General| Capacity | 50 liters |
|---|---|
| Power | 3.6 kW |
| Power Consumption | 3.6kW |
| Material | Stainless Steel |
| Temperature Range | 30-300°C |
