Operation FR35 DC, FR35 AC/DC
28
6.5 Using the cooler
A
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the
heated air can dissipate.
I
➤ Close the cooler, see chapter “Connecting the cooler” on
page 26.
A
➤ Press the “ON/OFF” button (fig. 2 1, page 2) for between one
and two seconds.
✓ The “POWER” LED lights up.
✓ The display (fig. 2 5, page 2) switches on and shows the
current cooling temperature.
I
✓ The cooler starts cooling the interior.
I
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that generated during operation can dissipate. Ensure that
the ventilation slots are not covered. Make sure that the device
is sufficiently far away from walls and other objects so that the
air can circulate.
NOTE
Place the cooler as shown (fig. 4, page 3).If you operate the box
in a different position it can be damaged.
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooler that are in-
tended to be cooled at the selected temperature.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “POWER” flashes
orange.
To Next Page
Loading...