How to operate your Friedrich
The controls will look like the following.
Control and Remote Control Operations
TEMPERATURE SETTING
• These buttonscontrolthe temperature
ofthe room.The temperaturecan beset withina rangeof
60°Fto 86°F,in incrementsof I°F.
MONEY SAVER
Thefanstopswhen the compressorstops cooling.
• Approximatelyevery3 minutesthe fan will turn onand sample
theroomair to determineif morecoolingis needed.
OPERATION MODE SELECTOR
• Everytimeyou push this button,it will rotatebetweenthe COOL,
FANand DRYmodes.
ON/OFF TIMER
ON-Ifunitisoff, use Timertoset numberof hoursbeforeunitstarts.
• PushTimerbuttonto advancesettingfromlhr - 2hrs- .....12hrs
maximum.
• Temp •
Fan Speed
(2>-
®
®
OFF- Youwillusuallyuseshut-offtimewhile you sleep.
• Ifunit is running,useTimerto set numberof hoursuntilshut-off.
• Foryoursleepingcomfort,onceTimeisset, the temperature
settingwill rise2°F after30min,andonce againafteranother
30min.
• PushTimerbuttonto advancesettingfrom2 hrs....12hrs
maximum.
POWER
• To turn the unit ON, push thebutton.To turn the unit OFF,push
thebuttonagain.
• This buttontakespriorityover all other buttons.
• When you first turn it on,the unitis on the High Cool modeand
thetemperatureis set at 72°F.
FAN SPEED
• Everytimeyou pushthis buttonitwill rotatebetweenthe
followingfan speeds:
High(F3)-_ Low(F1) _ Medium(F2)_ High(F3)
How to Insert Batteries
1. Remove the cover from the back of the remote
control.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
@
• Do not use rechargeable
batteries. Such batteries
differ from standard dry
cells in shape, dimensions,
and performance.
• Remove the batteries from
the remote control if the air
conditioner is not going to
be used for an extended
length of time.
To Next Page
Loading...
