Need help?Do you have a question about the Friedrich EMRT2 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Wi-Fi Enabled | No |
| Programmability | 7-day programmable |
| Voltage | 24V |
| Fan Speeds | Multiple |
| Backlight | Yes |
| Compatibility | Friedrich Smart Appliances |
| Power Source | Battery |
Procedure for programming the thermostat using a network programmer before installation.
Steps for physically mounting the thermostat to the wall, including wiring.
Setting the thermostat clock and entering the room number for identification.
Configuring compressor type, electric heat, and reversing valve settings.
Selecting pre-defined energy saving presets for the thermostat.
Testing thermostat operation and accessing configuration menus.
Configuring fan/temp modes, differentials, and setpoints.
Setting occupancy thresholds, delays, and night occupancy periods.
Adjusting temperature recovery times and setback delays.
Configuring auto-restore, humidity, and temperature calibration.
List and explanation of error codes displayed by the thermostat.
Preset values for temperature control, fan modes, setpoints, and differentials.
Preset values for temperature recovery and setback parameters.
Preset values for occupancy, auto-restore, and humidity control.
Physical dimensions and operating voltage requirements for the thermostat.
Specifications for the occupancy sensor and wireless communication.
Temperature accuracy rating and regulatory compliance information.
To Next Page
