CONFIGURATION BUTTON
NOTE: You can access Thermostat
Confi guration settings at any time by
pressing the “Confi guration” button.
9
Thermostat Con guration
Once the thermostat is powered, thermostat con guration settings will appear on
the thermostat screen.
In order to properly operate the PTAC/Vert-I-Pak unit:
➤ Set the thermostat clock;
➤ Enter the room number;
➤ Con gure the equipment settings;
➤ Select Energy Savings Preset;
The thermostat con guration screens have a 3-minute time-out. If no action is
taken within three (3) minutes, the thermostat will exit con guration settings.
To Next Page
Loading...
