Installation of indoor unit
Step eight: bind up pipe
1.
indoor unit
gas
pipe
indoor and
outdoor power cord
liquid pipe
drain hose
band
2.
3. Bind them evenly.
4. The liquid pipe and gas pipe should
be bound separately at the end.
drain hose
band
connection pipe
indoor power cord
Step nine: hang the indoor unit
1. Put the bound pipes in the wall pipe and then make them pass through the wall
hole.
2. Hang the indoor unit on the wall-mounting frame.
3. Stuff the gap between pipes and wall hole with sealing gum.
4. Fix the wall pipe.
Note:
indoor
outdoor
wall pipe
sealing gum
upper hook
lower hook of
wall-mounting frame
To Next Page
Loading...
Need help?
General
