EasyManuals Logo

Friedrich KP08A10 User Manual

Friedrich KP08A10
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
—4—
1.4 FEATURES
• Designed for COOLING ONLY.
• Powerful and whispering cooling.
Slide-in and slide-out chassis for the simple
installation and service.
• Low air-intake, top cooled-air discharge.
1.5 CONTROL LOCATIONS
• Built-in adjustable Thermistor
• Washable one-touch filter
• Compact size
• Reliable and efficient rotary compressor is equipped.
Power
Temp
Fan Speed
Timer Mode
1
2
3
4
5
1
2
453
6
DISPLAY REMOTE CONTROL
Precaution: The Remote Control unit will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to
86°F by 1°F. (16°C to 30°C by 1°C)
Select the lower number for lower temperature of the room.
OPERATION MODE SELECTION BUTTON
Every time you push this button, it will shift among COOL, ENERGY SAVER, FAN and DRY.F
-
Energy Saver: If Energy Save mode is selected, the fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
FAN SPEED SELECTOR
Every time you push this button, it is set as follows.
(Hi [F3] Low [F1] Med [F2] Hi [F3] Low [F1] ...)
ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If the unit is operating,
this button controls the time it will be turned off. If the unit is off state, this button controls the time it will start. Every time
you push this button, the remaining time will be set as follows.
- Stopping operation
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours 10Hours 11Hours
12Hours 0Hour 1Hour 2Hours ... )
- Starting operation
(1Hour 2Hours 3Hours 4Hours 5Hours 6Hours 7Hours 8Hours 9Hours 10Hours 11Hours
12Hours off 1Hour 2Hours ... )
REMOCON SIGNAL RECEIVER
6
6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Friedrich KP08A10 and is the answer not in the manual?

Friedrich KP08A10 Specifications

General IconGeneral
BrandFriedrich
ModelKP08A10
CategoryAir Conditioner
LanguageEnglish

Related product manuals