The high
efficiency and
zone cooling
abilities of
ductless
systems make
them the smart
choice to lower
energy costs.
ENERGY STAR
®
QUALIFIED MODELS
All Friedrich ductless models
exceed the federal 13.0 SEER
requirements. And more than
50% of our models have ratings
ranging from 16.5 to 22.0 SEER.
Seven models are ENERGY STAR
®
qualifi ed with EERs up to 14.0.
VARIABLE CAPACITY
ADVANTAGES
Inverter Technology allows each
system to adjust capacity and
cooling output to provide only the
amount of cooling needed at a
given time. For example, an 18000
Btu system will operate even more
effi ciently as a 15500 or less if
that's all that’s needed, reducing
energy consumption and expenses.
ZERO DUCT LOSS
The DOE reports that ducted
systems lose an average of 25-40%
in performance due to leaks, cracks
or disconnections in ductwork.
No ductwork means that ductless
systems do not experience duct
loss.
ZONE COOLING
FLEXIBILITY
Independently condition up to 4
separate zones using only a single
outdoor unit. Achieve the ultimate
in comfort and energy control by
cooling or heating only the zones
that are in use. And, because each
zone is independent of the others,
comfort settings can vary.
EXTREMELY QUIET
Ductless systems keep the
operating noise of the condensing
unit outdoors, while the blower fan
of the indoor unit remains whisper
quiet.
NO DIRTY AIR DUCTS
Now there’s no need to clean dirty air
ducts that can harbor dust, germs
and allergens that are eventually
blown into your home or offi ce.
Virtually silent
indoors and
no ductwork
to clean.
HIGH EFFICIENCY DUCTLESS SYSTEMS THAT ARE
ECO-FRIENDLY AND BUDGET FRIENDLY
Wall-mounted controller available
as an optional accessory on most
models
5
To Next Page
Loading...
Need help?
General
