To Next PageTo Next PageWhy Friedrich Air Conditioner doesn't operate immediately?
If your Friedrich air conditioner is stopped and immediately restarted, the compressor has a built-in delay. It will not operate for about 3 minutes to prevent fuse issues. Also, when the power is disconnected and then reconnected, a protection circuit activates for approximately 3 minutes, which prevents the unit from operating during this time.
General| Brand | Friedrich |
|---|---|
| Model | MW12C1E |
| Type | Window Air Conditioner |
| Cooling Capacity | 12, 000 BTU |
| Voltage | 115V |
| Amperage | 10.8A |
| Cooling Area | 550 sq. ft. |
| Fan Speeds | 3 |
| Installation Type | Window |
| Filter Type | Washable |
| Refrigerant | R-32 |
| ENERGY STAR Certified | Yes |
| Operating Modes | Cool, Fan |
Explains warning, caution, and prohibited operation symbols.
Unit starts automatic operation based on thermostat and room temp.
Gradually raises thermostat setting during cooling, then turns off.
Allows convenient control of air conditioner operation.
Intake grille can be removed for easy cleaning and maintenance.
Air filter treated to resist mildew growth for cleaner use.
Reduces airflow for quieter operation when FAN CONTROL is set to QUIET.
Illustrates how to mount and use the remote control holder.
Instructions for connecting power via circuit breaker.
Steps to insert batteries into the remote control unit.
Guide to setting the current time on the remote control.
Explains how to point and operate the remote control.
How to choose between AUTO, COOL, DRY, or FAN modes.
Instructions for adjusting the desired temperature setting.
Guide to selecting fan speed modes like AUTO, HIGH, MED, LOW, QUIET.
How to use the MASTER CONTROL button to select AUTO mode.
How to turn off the air conditioner using the START/STOP button.
Explains how AUTO mode switches between Cooling, Dry, and Fan based on temperature.
Steps to set the ON or OFF timer using the remote.
How to set a sequence of ON and OFF timer operations.
Explains the functionality and examples of the program timer.
How to activate the sleep timer function.
Steps to adjust the sleep timer duration.
Explains how the sleep timer adjusts temperature for comfort.
How to adjust vertical airflow using the remote control's button.
Manual adjustment of horizontal louvers for airflow direction.
How to activate the automatic swing function for louvers.
How to deactivate the automatic swing function.
Details on swing ranges and limitations.
Instructions for operating the unit directly when the remote is lost.
How to clean the indoor unit with a damp cloth.
Recommended procedure for storing the unit for extended periods.
Recommendation for regular professional maintenance.
Step-by-step guide on how to open, clean, and close the intake grille.
Instructions for removing, cleaning, and reinstalling the air filter.
Information on installing and using the optional air cleaning filter.
Explains why the unit may not operate immediately after starting.
Describes common noises like coolant flow or expansion/contraction.
Addresses potential smells from room conditions or air intake.
Explains mist formation during cooling or dry operations.
Discusses weak airflow during specific modes like Dry or Quiet.
Checks for power, fuse, circuit breaker, and timer status.
Checks filter, airflow blockage, open windows, and heat sources.
Checks remote batteries, fan speed settings, and SUPER QUIET mode.
General tips on how the unit performs in different conditions.
How the unit behaves after a power failure, including timer resets.
Explains the automatic restart feature after power interruption.
Specifies the recommended operating ranges for indoor/outdoor conditions.
