To Next PageTo Next Page
Need help?Do you have a question about the Friedrich QUIETMASTER 2008 and is the answer not in the manual?
General| Brand | Friedrich |
|---|---|
| Model | QUIETMASTER 2008 |
| Category | Air Conditioner |
| Language | English |
Safety precautions for hazards during service.
Warnings to prevent fire and water damage.
Diagram and labels of common unit components.
Explanation of the model number structure.
Guide for identifying the unit via its serial number.
Specifications for various model series like ENERGY STAR, X-Star, Quietmaster, TwinTemp.
Details on sleeve dimensions, circuit ratings, and mounting kits.
Warnings and requirements for wiring, grounding, and receptacles.
Instructions for starting the air conditioner unit.
How to select cooling, fan only, or MoneySaver modes.
Instructions for setting the desired temperature.
How to select different fan speeds.
How to enable the automatic fan speed adjustment feature.
Procedure for setting the unit's internal clock.
Instructions for setting the start and stop timers.
Explanation of the 3-minute compressor delay feature.
How to start the unit using the remote control.
How to select modes using the remote control.
How to adjust temperature using the remote control.
How to change fan speed using the remote control.
How to set the clock using the remote control.
How to set timers using the remote control.
Instructions for starting the XQ model unit.
How to select modes for XQ models.
How to adjust temperature on XQ models.
How to select fan speeds for XQ models.
How to enable Smart Fan on XQ models.
Procedure for setting the clock on XQ models.
Instructions for setting timers on XQ models.
Explanation of XQ model's compressor protection.
How to start the unit using the XQ remote.
How to select operating modes with the XQ remote.
How to adjust temperature settings with the XQ remote.
How to adjust fan speed with the XQ remote.
How to set the clock using the XQ remote.
How to set timers using the XQ remote.
Instructions for starting these unit models.
Explanation of the QuietMaster mode selection dial.
Explanation of the TwinTemp mode selection dial.
How to use the temperature control dial.
Explanation of the Money Saver switch function.
Explanation of the EQ08 model's function control dial.
Explanation of the EQ08 model's thermostat dial.
Procedure to check room temperature display.
How to activate the diagnostic test mode.
Definitions and meanings of error codes.
Explanation of the filter indicator function.
Description of the control's memory function.
Testing procedures for heat pump/electric heat models.
Testing the system control switch.
Testing procedures for KS, KM, SL models.
Testing procedures for EQ08 system control switch.
Definitions of mechanical and electrical components.
Testing thermostats on various models, adjustment warning, and bulb location.
Testing heat anticipator resistor and defrost thermostat.
Procedures for testing fan motors and capacitors.
Testing heating elements, drain valves, and defrost operation.
How the mode control pad functions.
Overview of operating sequences and features.
How the compressor operates based on conditions.
Return air and frost protection sensor functions.
How the unit operates in Cool, Money Saver, and Fan Only modes.
How to set fan speeds and use the Smart Fan feature.
Four fundamental laws governing refrigeration systems.
Step-by-step explanation of the refrigeration cycle.
Tools and capabilities needed for system repairs.
Detailed steps for charging and performing repairs.
Symptoms and checks for undercharged and overcharged systems.
Description of restrictions and how to identify them.
Checking capillary tubes and check valves.
How the reversing valve works and its parts.
How to test the solenoid coil for continuity.
How to check if the reversing valve is shifting properly.
Checking valve operation via touch test.
Steps for replacing a reversing valve.
Procedures for LRV, LRA, and external overload checks.
Performing resistance and ground tests on the compressor.
How to check for compressor valve issues.
Step-by-step guide for compressor replacement.
Troubleshooting and service for rotary compressors.
How to clean and maintain the air filter.
Cleaning coils, base pan, and blower components.
Periodic inspection of unit components.
Inspecting and cleaning the sleeve, drain, and front cover.
Troubleshooting non-running compressor or fan motor.
Troubleshooting insufficient cooling.
Troubleshooting unit not running and frozen evaporator coil.
Troubleshooting continuous operation and thermostat failures.
Troubleshooting short cycling, thermostat start, and noise.
Troubleshooting water leaks into the room.
Troubleshooting spitting water, moisture, and short cycling.
Troubleshooting long off cycles and external water leaks.
Troubleshooting uneven temperature and inadequate heating.
Troubleshooting defrost issues and heating performance.
Troubleshooting cooling when heat is desired and refrigerant issues.
Charts for diagnosing heat pump refrigerant and electrical issues.
Expected valve behavior and common malfunctions.
Wiring diagrams and schematics for XQ series cool only models.
Wiring diagrams and schematics for SS/SM series cool only models.
Wiring diagrams and schematics for KS/KM series cool only models.
Wiring diagrams and schematics for SL series cool only models.
Wiring diagrams and schematics for EQ08 electric heat models.
Wiring diagrams and schematics for ES/EM series electric heat models.
Wiring diagrams and schematics for EL series electric heat models.
Wiring diagrams and schematics for YS series heat pump models.
Wiring diagrams and schematics for YS/YM heat pump models.
Wiring diagrams and schematics for YL series heat pump models.
Instructions for estimating cooling load and selecting units.
Example of how to use the heat load form.
Details on warranty coverage, limitations, and obtaining service.
