Friedrich SQ06 - Page 16

16
SET POINT
F
AUTO FAN
79
FRR150
SET POINT
F
AUTO FAN
79
FRR147
The display returns to normal once the settings are saved.
Timer - Scheduler Control Block
SET POINT
F
AUTO FAN
79
SCHEDULE
FRR148
If the unit is operating in the TIMER or SCHEDULE mode, and then you
press any button except the
button, the Timer icon begins to
blink. All button action is blocked.
SET POINT
F
AUTO FAN
79
SCHEDULE
FRR149
The Timer icon stops blinking after 3 seconds.
Timer or schedule mode reactivated.
If the Schedule function is turned ON during normal operation
the
SCHEDULE
and Timer i cons illuminates. The control system immediately
runs the
current period schedule parameters.
SET POINT
F
AUTO FAN
79
FRR154
SCHEDULE
FRR153
The display shows a normal system.
Schedule ON Scenarios
You must turn the active Timer or Schedule mode OFF before making
changes. Once the changes are made, press the button to re-
activate Timer or Schedule mode.