iv
1. Installation Tools: (not included)
Hammer, Wire Cutters, Small Slotted
Screwdriver
2. Installation Video:
Installation and operation instructions
3. RoboRuler:
Used for setting the distance of the
perimeter wire from the lawn edge.
Notice the two settings: 1) at the lawn
edge and 2) against a wall or fence.
4. Pegs & Wire:
Used for securing the perimeter wire
to lawn edges and around obstacles.
Think of it as a virtual wall for your
RL500.
5. Perimeter Switch:
Activates the perimeter wire, which
defines the area in which RL500 will
operate.
(3 “C” batteries included)
6. Perimeter Switch Mounting Stake
For separate plot designation
7. Wire Connectors
For splicing wires
8. Fast Connectors
For separate plot installation
RL500
Battery Pack
4.
3.
5.
6.
7.
8.
2.
1.
What’s in the Box
To Next Page
Loading...
