44
Depart 12:30
Next digit
Press ‘GO’ to confirm
Mode Edge + Mow
Confirm
Scroll to the operation mode
and press ‘GO’ to confirm
(‘Edge + Mow’ or ‘Mow’ only –
‘None’ use to cancel active day)
M T W T F S S
Press GO
Scroll to the next day you
want to set and Press ‘GO’
Depart 12:30
Next digit
Press ‘GO’ to confirm
Mode Edge + Mow
Confirm
Scroll to the operation mode
and press ‘GO’ to confirm
(‘Edge + Mow’ or ‘Mow’ only –
‘None’ use to cancel active day)
M T W T F S S
Press GO
Scroll to the next day you
want to set and Press ‘GO’
Depart 00:00
Next digit
Scroll to set the time and Press ‘GO’
for the next digit (‘C’ is used to go back)
Manual
User Options
User Preferences
Press GO
Weekly program
Press GO
Press ‘GO’
Scroll up or down until the
‘Docking options’ is displayed
Set program
Press GO
Press ‘GO’
M T W T F S S
Press GO
Scroll to the day you want
to set and Press ‘GO’
Docking options
Press GO
Press ‘GO’
Press ‘GO’
4.2 Setting the Weekly Program
Remove the Manual Controller and follow the steps as outlined below.
Pressing the ‘C’ button at any time will change the display back to the main screen.
Important!
For best cutting performance, it is recommended to set the weekly program, so the Robomow
and the sprinkler never run simultaneously.
Figure 4.2 – Setting the Weekly Program
To Next Page
