What to do if my Frigelux CCO101BF does not operate?
If your Frigelux Freezer isn't operating, it might not be properly plugged in. Also, check the circuit breaker, as it may have tripped, or the fuse, as it may have blown.
Why is the external surface of my Frigelux CCO101BF Freezer warm?
It's normal for the exterior walls of your Frigelux Freezer to be up to 30°F warmer than room temperature. This occurs while the compressor works to transfer heat from inside the freezer cabinet.
Why does moisture form on the outside of my Frigelux Freezer?
Moisture forms on the outside of your Frigelux Freezer because the door is slightly open, causing cold air from inside the freezer to meet warm, moist air from outside.
Why is the temperature inside my Frigelux CCO101BF too cold?
If the temperature inside your Frigelux Freezer is too cold, the temperature control is likely set too cold. Turn the control to a warmer setting and allow several hours for the temperature to stabilize.
What to do if the door of my Frigelux CCO101BF will not close properly?
If the door of your Frigelux Freezer won't close properly, make sure the freezer is on a level surface. Also, check if the gasket is dirty and clean it. Ensure the storage basket is correctly positioned.
How to reduce vibrations from my Frigelux Freezer?
To reduce vibrations from your Frigelux Freezer: 1. Check that the freezer is on a level surface. 2. Ensure the floor is even and strong enough to support the freezer. 3. Level the freezer using wood or metal shims. 4. Make sure the freezer isn't touching the wall. If it is, re-level the freezer and move it away from the wall.
How to stop moisture from forming on the inside walls of my Frigelux CCO101BF Freezer?
Moisture forming on the inside freezer walls of your Frigelux Freezer can be normal if the weather is hot and humid, as this increases the internal rate of frost build-up. However, ensure that the door is not slightly open and avoid keeping the door open too long or too frequently. Also, check that the door is sealed properly.
Why does the compressor on my Frigelux CCO101BF turn on and off frequently?
If the compressor on your Frigelux Freezer turns on and off frequently, it could be due to several reasons: the room temperature may be hotter than normal, a large amount of food may have been added, or the door is opened too often or not closed completely. Also, check if the temperature control is not set correctly or the door gasket doesn't seal properly. Ensure the freezer has correct clearances and remember that if the freezer has recently been disconnected, it requires about 4 hours to cool down completely.
Why is the temperature inside my Frigelux CCO101BF too warm?
If the temperature inside your Frigelux Freezer is too warm, the temperature control might be set too warm. Try turning the control to a cooler setting and allow several hours for the temperature to stabilize. Also, avoid keeping the door open too long or opening it too frequently. Make sure the door is completely closed and the door gasket seals properly. A large amount of warm or hot food recently stored could also be the cause; wait until the freezer has had a chance to reach its selected temperature. If the freezer has recently been disconnected, allow 4 hours for it to cool down completely.
General| Category | Freezer |
|---|---|
| Capacity | 101 liters |
| Energy Class | A+ |
| Noise Level | 41 dB |
| Number of Doors | 1 |
| Defrost System | Manual |
To Next Page
