Installation Instructions
TOOLS YOU WILL NEED
# 1Phillipsscrewdriver
Tinsnips(forcutting
damper,if required)
Gloves
Safetygoggles
Pencil
Scissors
(to cut template,if necessary)
Saw (saber,holeor keyhole)
Rulerortapemeasureand
t edge
Electricdrill with skd',Y2"and%"
drill bits
Studfinder or Hammer(optional)
Level
Carpentersquare
(optional)
Fillerblocksor scrap
woodpieces,if needed
Fortop cabinetspacing
(usedonrecessedbottom
cabinetinstallationsonly)
Duct and masking tape
MOUNTING SPACE
66" (167.6cm)
or Morefrom
the Floorto the
Topof the
Microwave
BottomEdgeof
CabinetNeedsto
30" (76.2cm)
or Morefrom the
CookingSurface
I
Backsplash
NOTES:
• The space between the cabinets must be
30" (76.2 cm)wide and flee of obstructions.
• If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, fiat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
7
To Next Page
Loading...
