7
For both of the water tank and the big water reservoir, clean them with diluted
detergent, warm water and a soft cloth. Then use the water to rinse the inside,
and drain out the water from the draining port by unplugging the drain cap on the
back. It will help you keep the unit and ice-cube hygienicly, and also make the
unit work normally.
When cleaning, if find that the ice cube left on the evaporator and can not be
taken out easily, you can turn on the unit to let the unit enter the ice making
process, then press “ON/OFF” button for more than 5 seconds to let the unit start
ice harvest process to melt the ice cube.It will help you remove the hard ice
cube.
How to drain out the water from the internal tank and big water reservoir
completely
Because the water in the big water reservoir is stop to drain port by the water valave,
if you want to drain away all the water, please plug on the unit and but don’t start the
unit, then remove the drain port cap at the back. Wait some minutes, all of the water
will flow out.
2.
3.
To Next Page
Loading...
