Before using your ice maker, it is strongly recommended to clean it
thoroughly.
Take out the ice basket.
Clean the interior with diluted detergent, warm water and a soft cloth.
Then use the water to rinse the inside parts, and drain out the water from the
draining port by unplugging the drain cap on the back.
The outside of the ice maker should be cleaned regularly with a mild detergent
solution and warm water.
Dry the interior and exterior with a soft cloth.
When the machine is not in use for a long time, open the water drain cap to drain
water completely out from the water reservoir.
After using your ice maker for a long time, we also suggest you should
clean your unit.
Especially to the water separator pipe and the wate filters, you
must clean them periodically.
If the water separator pipe is blocked and there is no water flowing down when
you listen the compressor and the water pump inside are still working, please
turn off the unit first and disassemble this pipe down, and clean it. Clean the
each hole on the pipe wall displayed in following picture. After cleaning, install
back the water separator pipe and be sure the right terminal of the pipe connect
to the silicone pipe well and as original.
1.
2.
3.
4.
5.
6.
1.
CLEANING AND MAINTAINING YOUR ICE MAKER
6
Water Separator Pipe
Hole
Evaporator
To Next Page
Loading...
