6
Air Conditioner Features
(continued)
Rotary Vent Control
This Vent Control allows the air conditioner to either recirculate inside air (CLOSED)
or exhaust air to the outside (OPEN). These selections can be used with any FAN
selection.
The CLOSED position is used when maximum cooling is desired. It may also be used
for air recirculation without cooling when the air conditioner is set in any FAN
position.
The OPEN position removes stale air from the room and exhausts it to the outside.
Fresh air is drawn in through normal passages in the home.
4-Way Louvers
The 4-Way air directional louvers allow you to direct air flow up or down, left or
right throughout the room as needed. To adjust the air directional louvers side-to-
side, use the center handle as you move it side-to-side.
(4-WAY)
To Next Page
Loading...
Need help?
General
