NOTES:
[] Handletheairconditionergently.
[] Besureyourairconditionercabinetdoesnotfalloutofthe
openingduringinstallationorremoval.
3.Insertthetopandthenthebottomoftheright-handcurtain
housinginthetopandbottomcurtainchannelsontheair
conditioner.
[]
[]
The place where the power cord exits the air conditioner
should be no more than 4 ft(122 cm) from a grounded
3 prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of the air conditioner.
Top view
A
B
Attach Top Channel
NOTE: Attach the top channel and side curtains to the air
conditioner cabinet before placing the cabinet in the window.
1. Locate provided bag of screws.
2. Place the top channel on top of the air conditioner cabinet,
lining up the 3 holes in the top channel with the 3 holes on top
of the air conditioner cabinet.
3. Using 3 - #10 x ¼" pan-head Phillips thread-cutting
screws, attach the top channel to the air conditioner cabinet.
? _ _ A
Bottom view
A. Curtain housing
B. Curtain top channel on air conditioner
A. Curtain housing
B. Curtain bottom channel on air conditioner
A. Top channel
B. #10 x ¼" pan-head Phillips thread-cutting screws
Attach Side Curtains
1. Locate provided bag ol screws.
2. Insertthe right-hand curtain connector tab into the curtain
housing channels on the air conditioner.
3, Slide the curtain housing into the curtain guides as faras it
will go.
4. Repeatthe above steps forthe left-hand curtain.
Attach foam adhesive seal
Attach foam adhesive seal along the bottom ol the curtain
bottom channel.
B
A. Curtain housing
B, Foam adhesive seal
4
To Next Page
Loading...
