Frigidaire FFHT1835VS User Manual

17
WATER SUPPLY CONNECTION
WARNING
To avoid electric shock, which can cause
death or severe personal injury, dis-
connect the refrigerator from electrical
power before connecting a water supply
line to the refrigerator.
CAUTION
To Avoid Property Damage:
• Use stainless steel braided tubing
for the water supply line. Do not
use water supply tubing made of
¼ in. plastic. Plastic tubing greatly
increases the potential for water
leaks, and the manufacturer will not
be responsible for any damage if you
use plastic tubing for the supply line.
• DO NOT install water supply tubing
in areas where temperatures fall
below freezing.
• Chemicals from a malfunctioning
softener can damage the ice maker.
If the ice maker is connected to soft
water, ensure that the softener is
maintained and working properly.
IMPORTANT
Ensure that your water supply line connec-
tions comply with all local plumbing codes.

NOTE
Check with your local building
authority for recommendations on
water lines and associated materials
prior to installing your new refrigerator.
Depending on your local/state building
codes, Frigidaire recommends for
homes with existing valves its Smart
Choice
®
water line kit 5304437642
(with a 6 ft. Stainless Steel Water Line)
and for homes without an existing
valve, Frigidaire recommends its
Smart Choice
®
water line kit
5304493869 (with a 6’ Polyline
Waterline). Please refer to
Frigidaire.com for more information.
Before Installing The Water Supply Line,
You Will Need:
• Basic Tools: adjustable wrench, flat-blade
screwdriver, and Phillips screwdriver
• Access to a household cold water line
with water pressure between 30 and
100 psi.
• A water supply line made of stainless
steel tubing. To determine the length
of tubing needed, measure the dis-
tance from the ice maker inlet valve
at the back of the refrigerator to your
cold water pipe, so the refrigerator
can be moved out for cleaning.
• A shuto valve to connect the water
supply line to your household water
system. DO NOT use a self-piercing
type shuto valve.
• Do not reuse compression fitting or
use thread seal tape.
Ice Maker Models Only

NOTE
Automatic ice makers are optional acces-
sories that you may install in most mod-
els at any time. Visit Frigidaire.com for
information about Ice Maker Kit 117000.

Frigidaire FFHT1835VS Specifications

General

Type	freestanding
Style	top freezer
Color	stainless steel
Total Capacity	18.3 cu. ft.
Refrigerator Capacity	13.4 cu. ft.
Freezer Capacity	yes; 4.9 cu. ft.
Humidity Controlled Crispers	2 clear
Defrost System	automatic; frost free
Cooling System	eventemp cooling
Number of Refrigerator Shelves	2
Number of Refrigerator Adjustable Shelves	2
Number of Freezer Shelves	1
Number of Freezer Door Bins	2
Temperature Zones	single
Wine Rack	no
Dispenser	no
Ice Maker	optional
Water Filter	no
Air Filter	no
Control Type	electronic
Smart Home	no
Remote Control	no
Wi-Fi	no
Current	3.0a; 15

Weight and Dimensions

Depth	30 3/8 inch; 90° open 57"; 30 3/8"
Height	66 3/8 inch
Width	30 inch