To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FFMV154CLSA and is the answer not in the manual?
General| Type | Over-the-Range Microwave |
|---|---|
| Capacity | 1.5 cu. ft. |
| Power | 1000 Watts |
| Control Type | Electronic Touch |
| Color | Stainless Steel |
| Turntable | Yes |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Safety Lock | Yes |
| Defrost Function | Yes |
| Timer | Yes |
| Voltage | 120V |
| Width | 29.88 inches |
| Ventilation | 300 CFM |
Procedures for reporting and addressing damage incurred during shipping or installation.
Inventory of hardware and additional parts provided with the microwave for installation.
List of necessary tools and equipment for completing the microwave installation process.
Specifications for cabinet clearances and dimensions required for proper microwave installation.
Steps to safely remove the mounting plate from its packaging and prepare it.
Methods for locating wall studs to ensure secure mounting of the plate.
Details on maximum duct length, equivalent lengths, and components for external exhaust systems.
An example calculation and configuration for a top exhaust duct installation.
An example calculation and configuration for a back exhaust duct installation.
Steps for securely attaching the mounting plate to the wall using appropriate hardware.
Instructions for preparing the top cabinet, including drilling holes for vents and cords.
Modifying the microwave's blower unit for proper connection to the top exhaust system.
Ensuring the exhaust damper operates freely and correctly before final mounting.
Guidance for safely lifting and securing the microwave oven to the prepared mounting plate and cabinet.
Adjusting the exhaust adaptor to ensure a proper seal with the house ductwork.
Finalizing the installation by connecting the microwave's exhaust duct to the building's system.
Cutting an opening in the rear wall for the exhaust vent as per instructions.
Steps to remove the blower plate from the microwave to prepare for exhaust adaptation.
Securing the mounting plate to the wall, ensuring it aligns with studs for support.
Preparing the top cabinet, including drilling holes for the power cord and mounting screws.
Modifying the blower unit for the outside back exhaust configuration.
Safely mounting the microwave oven to the wall and top cabinet after blower adaptation.
Securing the mounting plate to the wall according to the instructions for ductless setup.
Preparing the top cabinet, including drilling holes for the power cord and mounting screws.
Verifying the correct installation and seating of the blower plate on the unit.
Safely mounting the microwave oven to the wall and top cabinet for ductless operation.
Steps for installing or replacing the charcoal filter for air recirculation.
