To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FFMV162LQA and is the answer not in the manual?
General| Type | Over-the-Range Microwave |
|---|---|
| Capacity | 1.6 cu. ft. |
| Power | 1000 Watts |
| Control Type | Electronic Touch |
| Turntable | Yes |
| Child Lock | Yes |
| Warranty | 1 Year Limited |
| Features | Sensor Cooking |
| Cooking Modes | Defrost, Reheat |
Steps to safely unpack the unit and retrieve the mounting plate.
Methods for locating wall studs for secure mounting.
Guidelines for selecting the correct position for the mounting plate.
Procedures for accurately positioning the mounting plate on the wall.
Instructions for venting exhaust upwards through a vertical duct.
Instructions for venting exhaust horizontally through the back.
Steps for non-vented installation using air recirculation.
Secure the mounting plate to the wall using appropriate fasteners.
Prepare the top cabinet by drilling holes as indicated by the template.
Modify the microwave's blower unit for upward external exhaust ventilation.
Ensure the exhaust damper functions correctly before proceeding.
Securely install the microwave oven into its designated location.
Align and connect the exhaust adaptor to the house ductwork.
Connect the external ducting to the microwave's exhaust system.
Cut an opening in the rear wall for the external exhaust duct.
Detach the blower plate from the microwave unit.
Secure the mounting plate to the wall using appropriate fasteners.
Prepare the top cabinet by drilling holes as indicated by the template.
Modify the microwave's blower unit for rear external exhaust ventilation.
Securely install the microwave oven into its designated location.
Secure the mounting plate to the wall using appropriate fasteners.
Prepare the top cabinet by drilling holes as indicated by the template.
Verify the blower plate is correctly installed on the microwave.
Securely install the microwave oven into its designated location.
Replace or install the charcoal filter for air recirculation.
