To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire FFMV164LSA and is the answer not in the manual?
General| Capacity | 1.6 cu. ft. |
|---|---|
| Wattage | 1000 Watts |
| Control Type | Electronic |
| Exhaust Fan Capacity | 300 CFM |
| Turntable | Yes |
| Sensor Cooking | Yes |
| Color | Stainless Steel |
| Preset Cooking Programs | Yes |
| Power Levels | 10 |
| Child Safety Lock | Yes |
| Defrost Function | Yes |
| Timer | Yes |
| Display Type | Digital |
| Voltage | 120V |
| Turntable Diameter | 13-1/2" |
Critical safety guidelines for installation and operation of the microwave oven.
Specifications for power supply, voltage, amperage, and dedicated circuit needs.
Procedures for addressing unit damage encountered during shipping or installation.
Inventory of hardware and additional components provided with the appliance.
List of essential tools required to perform the installation.
Required dimensions, clearances, and space considerations for installation.
Steps to detach and prepare the mounting plate from its packaging.
Methods to accurately locate wall studs for secure mounting.
Guidance on correctly positioning the wall plate beneath cabinets.
Instructions for marking and drilling pilot holes for wall plate attachment.
A summary of the key steps for the top exhaust installation.
Procedure for securely fastening the mounting plate to the wall.
Drilling holes in the cabinet for ventilation and wiring.
Reorienting the blower motor and fan for top exhaust venting.
Verifying the correct functionality and movement of the exhaust damper.
Steps for lifting and securely attaching the microwave to the mounting plate.
Aligning the exhaust adaptor precisely with the house duct system.
Connecting the exhaust duct to the adaptor and sealing all joints.
A summary of the key steps for the back exhaust installation.
Creating the necessary opening in the rear wall for exhaust ducting.
Detaching the blower plate from the microwave unit.
Securing the mounting plate using toggle bolts and wood screws.
Drilling holes in the top cabinet for mounting screws.
Reconfiguring the blower motor and fan for back exhaust venting.
Lifting and securely attaching the microwave oven to the top cabinet.
A summary of the key steps for the recirculating installation.
Securing the mounting plate to the wall.
Drilling necessary holes in the top cabinet for mounting.
Verifying that the blower plate is correctly installed on the unit.
Lifting and securely attaching the microwave oven to the top cabinet.
Steps for replacing or installing the charcoal filter for air recirculation.
