Frigidaire FGBD2445NQ0A - Getting Started

Yourdishwashercleansbysprayingamixtureofhotwateranddetergentthroughthesprayarmsagainstsoiledsurfaces.
Next,thedishwasherfillswithwatercoveringthefilterarea.Wateristhenpumpedthroughthesprayarmsontothe
dishware.Soilparticlesgodownthedrainasthewaterispumpedoutandreplacedwithcleanwater.Thenumberof
waterfillswillvarywiththecyclebeingused.FeaturesmayvarybyModel.
Nozzle and Upper SprayArm
TopRack
Tub Gasket
Cup
BowlTines
MiddleSprayArm
GlassTrap
Overfill Protector
Detergent Dispenser
Vent
Serial Label
located on right
side of tub)
Silverware
Basket
Bottom Rack
Blade Spray TM
Heating Element
,Rinse Aid
Dispenser
Getting Started
1. Load dishwasher
2. Add detergent
3. Add rinse aid
4. Select desired CYCLE. The indicator light above the
pad will glow when selected.
5. Select desired OPTIONS. The indicator light above
the pad will glow when selected.
6. Run hot water faucet nearest dishwasher until water
is hot. Turn water off.
7. To start, press START/CANCEL pad.
8. Close door to latch.
To customize your dishwasher to match your cabinets
• You will need a trim kit.
• See Step 10 of Installation Instructions that came with
dishwasher for more information.