Need help?Do you have a question about the Frigidaire GLDB957JB and is the answer not in the manual?
Describes essential safety rules for servicing appliances.
Explains proper grounding procedures and importance.
Details checks required before returning a product to service.
Discusses advancements leading to quieter operation, like motor design.
Covers reduced water and detergent consumption features.
Describes improved filtration and combined dispenser features.
Explains PTC heating element and fan-assisted drying.
Highlights Temp Assure, Heat Delay, and Turbidity Sensor.
Lists models with references to their corresponding diagrams.
Details water pressure, flow rate, and fill time requirements.
Covers voltage, current ratings, and electrical components.
Lists measured resistance for various electrical parts.
Details Temp Assure and Heat Delay functions during wash cycles.
Details Temp Assure and Heat Delay functions during rinse cycles.
Provides additional specific information on Temp Assure and Heat Delay.
Explains how water is distributed to the spray arms.
Details the wash pump's components, function, and replacement.
Illustrates Emerson motors with aluminum and phase mounting brackets.
Shows different ASKO motor configurations (Phase II and III).
Describes the upper spray arm's structure and water supply.
Details the lower spray arm's functions, including filter cleaning.
Explains the drain pump's sole function and construction.
Describes the drying process, vent operation, and air flow.
Describes the housing surrounding the vent valve in the door.
Explains the wax motor mechanism that opens the vent valve.
Details the components and operation of the vent actuator.
Covers the blower motor and upper vent housing for air circulation.
Explains the dual dispenser, its control, and adjustment.
Describes the door latch mechanism and its switch operation.
Lists control types, keypad options, and display codes.
Explains the thermistor's role in regulating water temperature.
Describes the selection to disable the heating element during drying.
Explains automatic water heating and delayed cycle advancement.
Details the safety thermostat preventing tub overheating.
Explains how to adjust the leveling legs for stability.
Lists assured water temperatures for various wash cycles.
Describes optional temperature adjustments like Hi-Temp Wash/Rinse.
Explains the Turbidity Sensor's role in detecting water soil levels.
Describes the "LO" display for low rinse aid detection.
Outlines tests for the rinse aid dispenser circuit board.
Identifies the thermistor, hi-limit thermostat, and drain pump.
Emphasizes safety measures before starting disassembly.
Provides steps for removing the main control panel assembly.
Instructions for replacing keypads on Slimline/Regular models.
Instructions for replacing keypads on Selectronic models.
Steps for safely removing the electronic control board.
Instructions on how to detach the outer door panel.
Details the process for removing the door vent assembly.
Steps for removing dispenser, vent valve, blower, and latch.
Instructions for inner door panel removal and seal replacement.
Steps to remove the upper rack from the dishwasher.
Removal procedures for water distributor and kick plate.
Steps to safely remove the heating element.
Procedures for removing the float switch and its bracket.
Steps to remove the water inlet valve.
Instructions for removing the drain pump assembly.
Removal of lower spray arm and glass trap components.
Steps to remove the filter and pump cover.
Instructions for removing the complete pump and motor assembly.
Removal of motor bracket, impeller, and housing.
Steps for removing thermistor and hi-limit thermostat.
Guidance for replacing indicator lamps on keypads.
Tips for when the unit won't turn on.
Troubleshooting for motor issues like humming or not starting.
Tips for diagnosing thermal overload protector trips.
Troubleshooting steps for when the dishwasher fails to heat.
Troubleshooting drainage problems and pump failures.
Troubleshooting issues related to the dishwasher not filling with water.
Tips for resolving unwanted water siphoning from the tub.
Explains common reasons for detergent remaining in the dispenser.
Flowchart for diagnosing low water level issues.
Flowchart for diagnosing low water temperature issues.
Identifies possible causes and diagnostic checks for door leaks.
Lists common causes and checks for dishes not being clean.
Flowchart for diagnosing steam escaping from the vent.
Diagnosing problems with control panel functions not programming correctly.
Troubleshooting steps for a dishwasher that is completely non-functional.
Troubleshooting steps when the control panel display does not light up.
Diagnosing when the dishwasher defaults to Normal Wash regardless of selection.
Troubleshooting steps for problems causing the dishwasher to overfill.
Flowchart for diagnosing issues preventing the dishwasher from filling.
Flowchart for diagnosing problems with the dishwasher draining.
Troubleshooting steps for the detergent dispenser failing to open.
Troubleshooting steps for when dishes emerge from the cycle not dry.
Troubleshooting steps for the wash pump motor not operating.
Chart mapping components to specific exploded view pages.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view of the door assembly for specified models.
Exploded view of the door assembly for the GPDB998J model.
Exploded view illustrating the components of the tub assembly.
Exploded view showing the motor and pump components.
Exploded view illustrating the dishwasher frame components.
Exploded view detailing the upper and lower rack components.
Exploded view detailing rack components for these models.
Exploded view detailing the upper and lower rack components.
Exploded view detailing the upper and lower rack components.
Lists models and their corresponding service data sheet numbers.
Explains color codes, basic operation, and display codes.
Lists display codes and presents the wiring diagram.
Description of the water/service test function and sequence.
Details various cycle options and their timing parameters.
Explains color codes, basic operation, and display codes for Amana.
Lists display codes and presents the wiring diagram for Amana.
Description of the water/service test function and sequence for Amana.
Details various cycle options and their timing parameters for Amana.
Describes essential safety rules for servicing appliances.
Explains proper grounding procedures and importance.
Details checks required before returning a product to service.
Discusses advancements leading to quieter operation, like motor design.
Covers reduced water and detergent consumption features.
Describes improved filtration and combined dispenser features.
Explains PTC heating element and fan-assisted drying.
Highlights Temp Assure, Heat Delay, and Turbidity Sensor.
Lists models with references to their corresponding diagrams.
Details water pressure, flow rate, and fill time requirements.
Covers voltage, current ratings, and electrical components.
Lists measured resistance for various electrical parts.
Details Temp Assure and Heat Delay functions during wash cycles.
Details Temp Assure and Heat Delay functions during rinse cycles.
Provides additional specific information on Temp Assure and Heat Delay.
Explains how water is distributed to the spray arms.
Details the wash pump's components, function, and replacement.
Illustrates Emerson motors with aluminum and phase mounting brackets.
Shows different ASKO motor configurations (Phase II and III).
Describes the upper spray arm's structure and water supply.
Details the lower spray arm's functions, including filter cleaning.
Explains the drain pump's sole function and construction.
Describes the drying process, vent operation, and air flow.
Describes the housing surrounding the vent valve in the door.
Explains the wax motor mechanism that opens the vent valve.
Details the components and operation of the vent actuator.
Covers the blower motor and upper vent housing for air circulation.
Explains the dual dispenser, its control, and adjustment.
Describes the door latch mechanism and its switch operation.
Lists control types, keypad options, and display codes.
Explains the thermistor's role in regulating water temperature.
Describes the selection to disable the heating element during drying.
Explains automatic water heating and delayed cycle advancement.
Details the safety thermostat preventing tub overheating.
Explains how to adjust the leveling legs for stability.
Lists assured water temperatures for various wash cycles.
Describes optional temperature adjustments like Hi-Temp Wash/Rinse.
Explains the Turbidity Sensor's role in detecting water soil levels.
Describes the "LO" display for low rinse aid detection.
Outlines tests for the rinse aid dispenser circuit board.
Identifies the thermistor, hi-limit thermostat, and drain pump.
Emphasizes safety measures before starting disassembly.
Provides steps for removing the main control panel assembly.
Instructions for replacing keypads on Slimline/Regular models.
Instructions for replacing keypads on Selectronic models.
Steps for safely removing the electronic control board.
Instructions on how to detach the outer door panel.
Details the process for removing the door vent assembly.
Steps for removing dispenser, vent valve, blower, and latch.
Instructions for inner door panel removal and seal replacement.
Steps to remove the upper rack from the dishwasher.
Removal procedures for water distributor and kick plate.
Steps to safely remove the heating element.
Procedures for removing the float switch and its bracket.
Steps to remove the water inlet valve.
Instructions for removing the drain pump assembly.
Removal of lower spray arm and glass trap components.
Steps to remove the filter and pump cover.
Instructions for removing the complete pump and motor assembly.
Removal of motor bracket, impeller, and housing.
Steps for removing thermistor and hi-limit thermostat.
Guidance for replacing indicator lamps on keypads.
Tips for when the unit won't turn on.
Troubleshooting for motor issues like humming or not starting.
Tips for diagnosing thermal overload protector trips.
Troubleshooting steps for when the dishwasher fails to heat.
Troubleshooting drainage problems and pump failures.
Troubleshooting issues related to the dishwasher not filling with water.
Tips for resolving unwanted water siphoning from the tub.
Explains common reasons for detergent remaining in the dispenser.
Flowchart for diagnosing low water level issues.
Flowchart for diagnosing low water temperature issues.
Identifies possible causes and diagnostic checks for door leaks.
Lists common causes and checks for dishes not being clean.
Flowchart for diagnosing steam escaping from the vent.
Diagnosing problems with control panel functions not programming correctly.
Troubleshooting steps for a dishwasher that is completely non-functional.
Troubleshooting steps when the control panel display does not light up.
Diagnosing when the dishwasher defaults to Normal Wash regardless of selection.
Troubleshooting steps for problems causing the dishwasher to overfill.
Flowchart for diagnosing issues preventing the dishwasher from filling.
Flowchart for diagnosing problems with the dishwasher draining.
Troubleshooting steps for the detergent dispenser failing to open.
Troubleshooting steps for when dishes emerge from the cycle not dry.
Troubleshooting steps for the wash pump motor not operating.
Chart mapping components to specific exploded view pages.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view illustrating the control panel components for this model.
Exploded view of the door assembly for specified models.
Exploded view of the door assembly for the GPDB998J model.
Exploded view illustrating the components of the tub assembly.
Exploded view showing the motor and pump components.
Exploded view illustrating the dishwasher frame components.
Exploded view detailing the upper and lower rack components.
Exploded view detailing rack components for these models.
Exploded view detailing the upper and lower rack components.
Exploded view detailing the upper and lower rack components.
Lists models and their corresponding service data sheet numbers.
Explains color codes, basic operation, and display codes.
Lists display codes and presents the wiring diagram.
Description of the water/service test function and sequence.
Details various cycle options and their timing parameters.
Explains color codes, basic operation, and display codes for Amana.
Lists display codes and presents the wiring diagram for Amana.
Description of the water/service test function and sequence for Amana.
Details various cycle options and their timing parameters for Amana.
General| Brand | Frigidaire |
|---|---|
| Model | GLDB957JB |
| Type | Built-In Dishwasher |
| Color | Black |
| Capacity | 14 Place Settings |
| Wash Cycles | 5 |
| Energy Star Certified | Yes |
| Width | 24 inches |
| Soil Sensor | Yes |
| Delay Start | Yes |
| Third Rack | Yes |
| Stainless Steel Interior | Yes |
| Heated Dry | Yes |
| Water Filtration System | Yes |
| Adjustable Upper Rack | Yes |
To Next Page