EasyManua.ls Logo

Frigidaire LFGF3019NSA - Oven Control Functions; Oven Control Keypad and Features

Frigidaire LFGF3019NSA
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
Forsatisfactory use of your oven, become familiar with the various pad features and functions of the oven asdescribed below.
@ set bake@
dock time
t merstart@
on-off time
oven
preheat
door locked
®
A bake broi[(
i!iiHi
dean (_)
v off cycles
hold
Oven Control Keypads
1. Feature indicator lights--These indicator lights
show which feature is active.
2. Clock pad -- Use to set the time of day.
3. Bake time pad -- Use to enter the length of baking
time desired.
4. Timer on-off pad -- Use to set or cancel the minute
timer, The minute timer does not start or stop cooking.
Timer on=off pad is used to set the continuous bake
function.
5. Start time pad --Use to set the desired start time for
baking & Self-Clean, May be used with bake time to
program a delayed timed bake,
6. Bake pad --Use to select the bake feature,
7, Broil pad -- Use to select the variable broil feature,
8. Clear off pad -- Use to clear any feature previously
entered except the time of day and minute timer, Press
clear off to stop cooking,
Also use clear off to activate oven lockout feature,
9. Clean pad -- Use to set a Self-Clean cycle.
10. Oven, preheat & door locked lights -- The "oven"
light will glow each time the oven turns on to maintain
the set oven temperature. The "preheat" light will
glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual
oven temperature. The "door locked" light will flash
when the oven door locks and unlocks, the oven door
lockout is active or when the self-clean feature is
active.
11. Up and down arrow pads-- Use with the feature or
function pads to set oven temperature, bake time, start
time, clean time (when programming an automatic
start time), setting or adjusting the clock and minute
timer.

Related product manuals