1-999-1539 REV A09/11/17
Owner’s Guide
Use and Care Manual
Customer Service
1-800-325-6952
• Safety
• Installation
• Start-up
• Operation
• Maintenance
• Troubleshooting
Ducted Cooler Models:
FD350, FD450, FD650
FS350, FS450, FS650
Congratulations: You have purchased a product of superior performance and design, which will give the best service when
properly installed, operated and maintained.
• Read all instructions carefully before installation.
• Cooler motor, pump, cabinet and junction box must be
grounded in accordance with all local and national codes.
A ground wire must be used between the cooler and the
power source.
• Always disconnect electrical power to the cooler before
working on cooler.
• WARNING To reduce the risk of re or electrical shock
do NOT use this fan with any solid state speed control
device.
• Do NOT remove side panels while cooler is running.
• Do NOT operate with evaporative pad removed.
• Do NOT locate cooler near exhaust or vent pipes as
odors or fumes may be drawn into the unit.
• Be sure cooler is connected to proper line voltage
stamped on blower motor and pump motor specication
plate.
NOTE: IMPROPER VOLTAGE WILL VOID MOTOR
WARRANTY.
READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
This guide will provide you with information needed to assemble the unit. It also contains information on how to safely operate,
inspect, maintain and troubleshoot your Frigiking evaporative air cooler.
THE USE OF ANODE DEVICES, CHEMICAL ADDITIVES, OR
COOLER CLEANER TREATMENTS IN THIS COOLER WILL
VOID THE WARRANTY.
Model # Serial #
Date of Purchase:
Place of Purchase:
Serial # can be found outside the cabinet.
• Your warranty does NOT cover shipping damage. Report
all shipping damage at once to store making the delivery.
• For future reference, record the model and serial number,
date and place of purchase of your evaporative cooler
here:
To Next Page
General