How to fix FRIMED Laboratory Equipment that does not switch on?
If your FRIMED Laboratory Equipment doesn't switch on, first ensure the main power switch is in the ON position. If it still doesn't power up, check the plug, socket, fuses, and electrical line for any power failures. If these steps do not resolve the issue, contact the service department.
What to do if FRIMED Laboratory Equipment refrigeration unit runs constantly but does not reach set temperature?
If the refrigeration unit of your FRIMED Laboratory Equipment runs constantly but doesn't reach the set temperature, consider the following: * Ensure better room ventilation and clean the condenser if the room temperature is too high. * Clean the condenser if it's dirty. * Check the door gasket for damage, and make sure refrigerator contents are not obstructing the door. * Defrost manually if the evaporator is coated with ice. For issues such as refrigerant recharge, a non-functioning condenser fan, or an open defrost valve, contact the service department.
General| Brand | FRIMED |
|---|---|
| Model | CL60B/PF |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
