How to fix FRIMED Laboratory Equipment that does not switch on?
If your FRIMED Laboratory Equipment doesn't switch on, first ensure the main power switch is in the ON position. If it still doesn't power up, check the plug, socket, fuses, and electrical line for any power failures. If these steps do not resolve the issue, contact the service department.
What to do if FRIMED Laboratory Equipment refrigeration unit runs constantly but does not reach set temperature?
If the refrigeration unit of your FRIMED Laboratory Equipment runs constantly but doesn't reach the set temperature, consider the following: * Ensure better room ventilation and clean the condenser if the room temperature is too high. * Clean the condenser if it's dirty. * Check the door gasket for damage, and make sure refrigerator contents are not obstructing the door. * Defrost manually if the evaporator is coated with ice. For issues such as refrigerant recharge, a non-functioning condenser fan, or an open defrost valve, contact the service department.
Why FRIMED Laboratory Equipment refrigeration unit does not start?
If the refrigeration unit of your FRIMED Laboratory Equipment doesn't start, check if the set temperature has already been reached and set a new temperature if needed. If a defrosting cycle is in progress, wait for it to end, then switch the unit off and on again after a few minutes. For control panel faults or other issues, contact the service department.
How to resolve water or ice deposits in the drip tray of FRIMED Laboratory Equipment?
If you notice water or ice deposits in the drip tray of your FRIMED Laboratory Equipment, it might be due to a clogged drain outlet. Try cleaning the drain and drain outlet. Also, ensure that the appliance is levelled.
Provides essential primary safety regulations to follow when operating the appliance to prevent hazards.
Outlines the customer's duties regarding electrical connection, installation site, maintenance, and handling of power failures.
Specifies that the appliance is intended solely for blood and blood product preservation and defines improper use.
Lists conditions and environments where the appliance must not be used to ensure safety and proper function.
Details general regulations for appliance positioning to prevent damage and hazardous conditions for personnel.
Outlines requirements for qualified electricians and safety measures for connecting the appliance to the power supply.
Describes safety features and protections against mechanical and electrical risks during appliance operation.
Strictly forbids tampering with or removing safety plates and guards, voiding manufacturer responsibility.
Details the steps for correctly switching on the appliance, including password entry.
Describes the control panel layout, LED indicators, key functions, and how to navigate menus.
Lists and describes various alarm codes, their display indications, and meanings for error identification.
Emphasizes the importance of monthly cleaning for the condenser to maintain refrigeration system efficiency.
General| Brand | FRIMED |
|---|---|
| Model | AF70E |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
