How to fix FRIMED Laboratory Equipment that does not switch on?
If your FRIMED Laboratory Equipment doesn't switch on, first ensure the main power switch is in the ON position. If it still doesn't power up, check the plug, socket, fuses, and electrical line for any power failures. If these steps do not resolve the issue, contact the service department.
What to do if FRIMED Laboratory Equipment refrigeration unit runs constantly but does not reach set temperature?
If the refrigeration unit of your FRIMED Laboratory Equipment runs constantly but doesn't reach the set temperature, consider the following: * Ensure better room ventilation and clean the condenser if the room temperature is too high. * Clean the condenser if it's dirty. * Check the door gasket for damage, and make sure refrigerator contents are not obstructing the door. * Defrost manually if the evaporator is coated with ice. For issues such as refrigerant recharge, a non-functioning condenser fan, or an open defrost valve, contact the service department.
Why FRIMED Laboratory Equipment refrigeration unit does not start?
If the refrigeration unit of your FRIMED Laboratory Equipment doesn't start, check if the set temperature has already been reached and set a new temperature if needed. If a defrosting cycle is in progress, wait for it to end, then switch the unit off and on again after a few minutes. For control panel faults or other issues, contact the service department.
How to resolve water or ice deposits in the drip tray of FRIMED Laboratory Equipment?
If you notice water or ice deposits in the drip tray of your FRIMED Laboratory Equipment, it might be due to a clogged drain outlet. Try cleaning the drain and drain outlet. Also, ensure that the appliance is levelled.
Explains appliance testing procedures and warranty terms, including exclusions and claims.
Provides primary general safety rules and warnings for operating the appliance.
Details general regulations for correct appliance placement to avoid damage and hazards.
Outlines requirements for qualified electricians and safety indications for electrical connection.
Lists preliminary checks and indications for optimal duty after installation.
Details features and protections against mechanical and electrical risks during operation.
Strictly forbids tampering with or removing safety plates and guards on the appliance.
Guides users through the process of checking connections and starting up the appliance.
Details the control panel layout, LED decoding for alarm states, and key functions.
Outlines the menu structure, parameters, and procedures for accessing and modifying settings.
Lists and describes various alarm codes displayed by the appliance and their meanings.
Outlines the steps for downloading records and data from the appliance via USB.
Guides users on calibrating the internal temperature probe S1 for accuracy.
General| Brand | FRIMED |
|---|---|
| Model | FS25E |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
