Fritz! 1750E - Page 13

Establishing a Wireless LAN Connection Using WPS
13
Connecting FRITZ!WLAN Repeater via WPS with
FRITZ!Box
This section describes how to connect the
FRITZ!WLAN Repeater with a FRITZ!Box using WPS.
You can also connect the FRITZ!WLAN Repeater with any other
wireless access point that supports WPS as described below.
In this case, see the documentation of your wireless access
point.
1. Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
2. Press the “WPS” button on the FRITZ!WLAN Repeater.
Hold the button down until the “WLAN” LED flashes.
LAN
WLAN
Power
6 seconds