16
Establishing a Wireless Connection Manually
3.3 Establishing a Wireless Connection Manually
Using this method, you can connect the FRITZ!WLAN Repeater
with your wireless access point even if the wireless access
point doesn’t support WPS and you cannot use the online
wizard.
Connecting FRITZ!WLAN Repeater with a Computer
1. Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
2. Use the computer’s wireless LAN software to establish a
wireless connection between the computer and
FRITZ!WLAN Repeater. Select WPA or WPA2 as encryption
method and enter the key 00000000 (8 zeros, the value
preset in the FRITZ!WLAN Repeater).
or
Connect your computer to the LAN port of the
FRITZ!WLAN Repeater using the LAN cable included with
delivery. The computer must have the setting “Obtain an
IP address automatically” enabled (see also Obtaining
an IP Address Automatically on page 31).
To Next Page
Loading...
