FRITZ!Box 7330 138
Setting Up Call Diversion
20.5 Setting Up Call Diversion
With call diversion you can divert incoming calls. The calls are
diverted to an external telephone line or to a certain tele-
phone connected with your FRITZ!Box.
If your telephony provider supports direct diversion of incom-
ing calls, calls will be diverted by your provider. Otherwise the
FRITZ!Box establishes a second connection to divert the call.
In either case, call diversion to an external line will be
charged at your contracted telephone rates.
Configuring Call Diversion for All Calls
You can set up call diversion for all incoming calls.
For the destination number, enter a complete fixed-line or In-
ternet telephone number. Internet telephone numbers may
not contain letters or special characters.
Configuring Call Diversion for All Incoming Calls
N Pick up the handset.
Enter one of the following three keypad
sequences:
s21s<DNo>sr Configures immediate call diversion to
the destination number <DNo>.
s61s<DNo>sr Configures delayed call diversion (after
20 seconds) to the destination number
<DNo>.
s67s<DNo>sr Configures call diversion on busy to the
destination number <DNo>.
Calls will be diverted when the telephone
number called is busy.
Q Wait for the positive acknowledgement
tone.
O Hang up the handset.
To Next Page
Loading...
