Note:
If there is water leakage at the connecting position between
the sink faucet and the mounting base (F) , it is recommend-
ed to use the plumber tape provided to avoid leakage.
If you still cannot connect it properly, please contact Frizzlife
customer service team for assistance.
3. Use Method
Step 2：Put the system in its proper position. Switch the lever to
the level position and run water to the system slightly. Flush it for
5-10 minutes during the first use.
Please select the appropriate adapter (G) according to the
thread size.
Use a coin to connect the adapter to the faucet, then connect
the mounting base (F) to the adapter. If the seal ring of the
adapter is loose, please install it firmly.
Tap Water
Switch the lever to the downward direction to get tap water.
04
For internal threaded faucets
To Next Page
Loading...
