To Next PageTo Next PageWhat to do if Froling P4 Pellet 8 - 60 Boiler shut down due to excessive temperature?
If your Froling Boiler shuts down due to excessive temperature because the maximum temperature of 105°C was reached, you should first unscrew the cap on the safety temperature limiter. Then, reset the safety temperature limiter by pressing it with a screwdriver.
General| Type | Pellet Boiler |
|---|---|
| Output Range | 8 - 60 kW |
| Fuel Type | Wood Pellets |
| Max Operating Temperature | 95 °C |
| Operating Pressure | Up to 3 bar |
| Connection Diameter Flue Gas | 150 mm |
General safety instructions and warnings about usage.
Defines authorized fuel and authorized operators for the boiler.
Technical specifications and installation requirements.
Details on safety features like safety valve and STL.
Guidelines for the boiler room environment.
Warnings about potential hazards like hot surfaces and unauthorized fuel.
Steps to follow in case of overheating, gas smell, or fire.
Instructions for the initial setup and commissioning of the boiler.
Procedure for adding pellets to the fuel store.
Steps for switching on, controlling, and switching off the boiler.
Important precautions and recommendations for boiler maintenance.
Detailed procedures for regular checks, cleaning, and maintenance.
Checks for safety valve and system pressure.
Procedures for emptying ash drawers/containers.
Annual maintenance tasks for flue gas system and heat exchanger.
Procedures for emission testing at rated load.
Information on recommended servicing and customer support.
Guidance on using original replacement parts.
Addresses issues related to power supply and system behavior after outages.
Procedures for dealing with overheating and resetting the safety limiter.
Explains fault messages, their types, and how to acknowledge them.
Information regarding warranty terms and conditions.
Contact details and address of the manufacturer.
Statement confirming product compliance with relevant directives.
