10
P356000101enT1.man
8.2 Inserting the strap
Pull up the handle lever firmly with your right
hand.
Insert the two straps well aligned on each other
into the strap guide using your left hand.
Release the handle lever.
8.3 Tensioning the strap
Press down the tensioner valve lever and then
release it again after the desired strap tension has
been reached.
The tensioning operation can be interrupted and
restarted at any time.
The tool must carry out a balance movement
while tensioning.
Therefore:
- Don’t hinder the tools movement in the signed direction.
Disregard:
- The feed wheel slips on the strap without tensioning it.
To Next Page
Loading...