Device concept 48
PTB 200i / 350i robot plasma torches 49
Device concept 49
TTB 360i / 720i W R ArcTig robot welding torches 50
Device concept 50
Notes on the device 51
TPHP 500i R torch hosepack 52
Device concept 52
Notes on the device 52
Hosepack holder for conventional robots (Clamp/i TIG CON Index Disc+) 54
PushPull hosepack CWF 25i Drive R/G/W/FSC 55
Device concept 55
KD Drive 56
Wire buffer 57
Notes on the device 57
THP 720i R/W/CON/ArcTig torch hosepack 59
Device concept 59
Notes on the device 59
CW Standard cold-wire feed 61
Device concept 61
Notes on the device 62
CW HighEnd cold-wire feed 63
Device concept 63
Notes on the device 64
Options 65
Options 65
PowerLiner 65
THPi mounting adapter 66
Mounting bracket 67
TIG CrashBox signal cable(Crashbox Signal Cable/i TIG) 68
Trailing gas nozzle 68
Water-cooled gas nozzle for PTW 350i plasma welding torch 69
Operating controls, connections and mechanical components 71
Safety 73
Safety 73
CWF 25i R wirefeeder 74
Front, back 74
Page 75
Cold wire drive unit KD Drive 76
Controls, connections, and mechanical components 76
SplitBox hosepack SB TP 95i CON R 77
SplitBox, hosepack 77
TPHP 500i R torch hosepack 79
Operating controls, connections, and mechanical components 79
THP 720i R/W/CON/ArcTig torch hosepack 81
Controls, connections, and mechanical components 81
Function of the Gas-Test, Wire-Return and Wire Threading Buttons 83
Function of the gas-test, wire-return, and wire-threading buttons 83
Installing system components – conventional robot 85
General 87
Safety 87
Installation sequence for conventional push robots 88
Installation sequence of conventional robots – PushPull 88
Install the CWF 25i R wirefeeder 89
Fitting the CWF 25i R wirefeeder 89
Fitting the TPSi robot flange and TPSi CrashBox 91
Mounting the CrashBox /i on a conventional robot 91
Install the TPHP 500i R welding torch hosepack 94
Fitting the TPHP 500i R torch hosepack 94
4
To Next Page
Loading...
