To Next PageTo Next Page
Need help?Do you have a question about the Fronius Robacta MTG 3500 and is the answer not in the manual?
General| Rated input voltage | 3 x 400 V |
|---|---|
| Protection class | IP23 |
| Welding process | MIG/MAG |
| Mains frequency | 50-60 Hz |
| Wire diameter | 0.8 - 1.6 mm (depending on material) |
Explains hazard symbols (DANGER, WARNING, CAUTION, NOTE, IMPORTANT) for immediate recognition.
Outlines essential safety requirements for personnel and proper device handling.
Covers risks from welding fumes, EMF, and electrical shock, plus protective measures.
Details risks from welding current, meandering currents, and specific hazard areas.
Defines intended use, limitations, and required environmental operating parameters.
Lists obligations for operators and personnel to ensure safe and correct usage.
Specifies requirements for Fronius cooling units and coolant quality.
Guides for mounting brackets, fitting torch necks, replacing nozzles, and installing liners.
Advises on regular upkeep, using original parts, and repair procedures.
Helps users recognize and identify common worn or defective components.
Provides solutions for issues like no current, gas problems, wire feed, and torch overheating.
Explains symbols, general specifications, and compliance with IEC 60974-7.
Details voltage ratings, duty cycle, and technical data for torch, trigger, and cooling.
