Welding current range
TIME 3 - 500 A
MIG/MAG 3 - 500 A
Rod electrode 10 - 500 A
TIG 3 - 500 A
Welding current at
10 min/40 °C (104 °F)
40 % d.c.
3)
500 A
60 % d.c.
3)
450 A
100% d.c.
3)
360 A
Welding voltage range according to standard characteristic
TIME 28.0 - 48.0 V
MIG/MAG 14.2 - 39.0 V
Rod electrode 20.4 - 40.0 V
TIG 10.1 - 30.0 V
Max. welding voltage 48 V
Open circuit voltage 70 V
Degree of protection IP 23
Type of cooling AF
Insulation class F
EMC emission class A
Marks of conformity CE
Safety symbol S
Dimensions l x w x h 626 x 287 x 477 mm
24.65 x 11.30 x 18.78 in.
Weight 37.4 kg
82.45 lb.
1)
connected to public grid at 230/400 V and 50 Hz
2)
PCC = Interface to the public grid
3)
d.c. = Duty cycle
CMT 4000
Advanced
Mains voltage 3 x 400 V
Mains voltage tolerance +/- 15 %
Mains frequency 50 / 60 Hz
Mains fuse protection 35 A slow-blow
Mains connection
1)
Restrictions possible
Primary continuous current
100% d.c.
2)
-
Primary continuous power 15 kVA
Cos phi 0.99
Efficiency -
Welding current range
201
EN
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044
To Next Page
Loading...