EasyManua.ls Logo

Fronteq FS0507T - Page 15

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FS0507T PN 60711000162
prevent the work platform from accidentally falling, please use the safety pillar and
the safety block. When repairing, please specify the operation commander to
monitor the use of safety pillars and safety blocks, etc. while determining the
operating procedures and command operations.
When working near the rotating part, be careful not to get caught, and do not let the
item near the rotating part.
When the defect is found by the inspection site, please report it to the mechanical
unit or the responsible person promptly and apply to the company for processing.
Since personal judgment may cause a major accident or malfunction, please consult
the company if you cannot judge the severity of the defect.
Danger Pay attention to the electric shock accident during the check
When the unit is in the startup state, do not touch the internal electronic
components of the machine with your hands. When it is necessary to check and
repair, you need to use insulated gloves to cut off the power.
Note Unplug the battery cable during maintenance of the electrical
system
When the battery cable ("-" connector) is removed and the electrical system is
inspected and maintained, the short circuit may cause burns or damage to the
electrical and electronic equipment. Please unplug the battery cable on the side of
the “—” connector.
Warning Pay attention to high oil temperature and high oil pressure
When performing inspection and maintenance of hydraulic equipment, piping, and
filters,
check that the hydraulic fluid has cooled sufficiently before operating. High
temperature
hydraulic oil can scald on your body.
When high-pressure hydraulic oil enters the skin or eyes, there is a danger of serious
injury to
the human body. When checking the oil leakage of hydraulic equipment, piping, etc.,
wear protective glasses and protective gloves. Do not use light to confirm. Use thick
paper.
When removing hydraulic equipment, piping, filters, etc., the internal pressure must
be released and the work is performed.
When high pressure oil enters your skin or eyes, receive medical attention
immediately.
Warning Use the right tools
Please use the right tools correctly. Please do not use tools that are deformed or