FS0507T PN 60711000162
Dangerous
●When the hook is not fastened, the hook may be fall off and the machine may be
damaged or the machine may fall.
●Be sure to fix the anti-off buckle firmly, otherwise it may cause the hook to fall off.
3.2.2Lifting with four holes
●Please follow the instructions below when lifting with four holes.
1）Lower the platform to the lowest point, collapse the extended platform and lock it.
2）Hooking the spreader into the four special holes on the base frame.
3）Using cloth to protect the parts that cable contact with the railing or platform.。
4）Lift the center of the vehicle.
3.3 Transporting with forklift
●When forking from the side of the machine, inserting the fork and lift it according to
the width and height of the fork insertion opening on the inside of the track.
●When forking from the front or the back of the machine, please adjust the width and
height to insert the fork into the square tube. If the forks are under the square tube,
the machine may fall off.
Attention
Without using the designated places for transport, there could be major accident such
as falling off, turning over and so on.
3.4 Fixing on the cargo platform of the transport vehicle
●Lower the platform to the lowest point, collapse the extended platform and lock it.
●Please make sure that the machine is correctly loaded at the right place of the transport vehicle.
●In order to prevent the machine from moving due to the vibration during the transportation, etc.,
please fix the machine with cargo packing.
●Please use the hook hole to fix the machine.
Dangerous
●When the truck platform or the loading plate is tilted left and right, there is a possibility of rollover,
which is very dangerous.
●When using the loading plate, do not change the direction of travel, and there is a possibility of
rollover, which is very dangerous.
●When the loading plate is wet, it may slip and cause a rollover.
●When loading the car, please arrange special person guidance, pay attention to safe operation.
4. Operation
To Next Page
Loading...