FS0507T PN 60711000162
Danger Confirmation of the workplace, prohibition
of the workplace
● At the job site, please pay attention to the general staff and
operators and the surrounding conditions, and pay attention to
ensure safety.● Please use the fence that is prohibited from
entering, and the scope of work should be properly enclosed
so that non-related personnel cannot enter. When someone
approaches the work area, stop the work and issue a warning to respond.
●Please confirm the hazardous materials and obstacles in the working area and take
safety measures.
● When other working vehicles are approaching during work, please be careful to avoid
contact accidents. If necessary, please configure the guidance personnel to explore
security measures such as guidance, attention, and notice.
Warning Precautions when working together
● When operating the machine, set a fixed signal in order to ensure reliable contact
between the operator on the work platform and the operator when operating the work
platform outside the work platform. And take necessary measures such as the
designated person to send signals.
●When you work together or set up a guide person, please discuss the contents of the
work beforehand, set a fixed signal, and work with the specified signal. Please specify
the person who sent the signal as one person. Simultaneous signals from several
people can cause confusion and cause accidents.
●To ensure safety, please do not use radios, headphones, etc. that interfere with
signals and reports.
Warning Prohibition of fatigue and drinking operations
● Do not work when you are over-fatigued and drinking, or when taking hypnotic
drugs.
Warning Check before working
●Before starting the job, be sure to check the machine before starting the job to
confirm that there is no abnormality in the machine.
● Do not use the machine in the event of malfunction or damage. And repair
immediately.
Attention Surrounding
● Scattered tools, garbage, parts, and attached oil, mud, snow, etc. may risk tripping or