Frontier ST1028S - Page 11

PART NO. DESCRIPTIONREF NO
Auger Drive Group - 26", 28", 30" & 32"
Footnotes
Frontier Model ST1028S, ST1130S & ST1332S
PIN, Shear 1 MT1668344SM
COTTER PIN, 1/4" Self Locking 2 MT7023590SM
IMPELLER ASSEMBLY 3 MT1612187ASM
SCREW, Set Square Head Cup Point, 3/8-16 x 1/2 G8 4 MT1960474SM
PULLEY, 8.40 OD .752ID .720WD W/Hub 5 MT1732185SM
AUGER ASSEMBLY, 24" & 26" R.H. (Used On ST8526) 6 MT1734674ASM
AUGER ASSEMBLY, 28" & 30" R.H. (Used On ST9528, ST1028S & ST1130S) 6 MT1734676ASM
AUGER ASSEMBLY, 32" R.H. (Used On ST1332S) 6 MT1734678ASM
AUGER ASSEMBLY, 24" & 26" L.H. (Used On ST8526) 7 MT1734673ASM
AUGER ASSEMBLY, 28" & 30" L.H. (Used On ST9528, ST1028S & ST1130S) 7 MT1734675ASM
AUGER ASSEMBLY, 32" L.H. (Used On ST1332S) 7 MT1734677ASM
GEAR BOX ASSEMBLY 8 MT1732303SM
SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8 9 MT1928721SM
KEY, Woodruff 10 MT2818312SM
CARRIAGE BOLT, 5/16-18 x 3/4 G5 11 MT1931333SM
NUT, Hex Flange Whiz Lock, 5/16-18 12 MT1931277SM
TUBE (Used On ST8526 & ST1130S) 15 MT1733406SM
The above parts group applies to the following Mfg. Nos.:
2007
11
© Copyright by Briggs and Stratton Corporation
1695321 - ST1028S
1695322 - ST1130S
1695323 - ST1332S
TP 400-4677-02-LW-T