PART NO. DESCRIPTIONREF NO
Engine and Frame Group - Steerable
Footnotes
Frontier Model ST1028S, ST1130S & ST1332S
ENGINE, 10.5HP B&S Powerbuilt * (Model # 20E1140110E1) 1 -----
ENGINE, 11.5HP B&S Intek * (Model # 21M2140114E1) 1 -----
ENGINE, 13HP B&S Intek * (Model # 21A4140119E1) 1 -----
CORD, Electric Start 2 MT1724064SM
GUARD, Muffler 3 MT1734698SM
SCREW, Hex Washer Head Taptite 4 MT1929477SM
CARRIAGE BOLT 5 MT002X97MA
NUT, Speed 6 MT028X76MA
NUT, Hex Flange, 5/16-18 Whiz Lock Small 7 MT2831277SM
PULLEY, Engine 8 MT1501109MA
WASHER, 3/8 9 MT1922755SM
LOCKWASHER, Spring 3/8 10 MT1916965SM
CAPSCREW, Hex Head, 3/8-24 x 1-1/4 G8 11 MT1960428SM
V-BELT, Drive 12 MT1733324SM
V-BELT, Auger 13 MT1733507SM
STOP, Belt 14 MT1733014SM
LOCKWASHER, Spring 5/16 15 MT1917356SM
CAPSCREW, Hex Head, 5/16-24 x 3/4 G5 16 MT1921515SM
IDLER BRACKET ASSEMBLY, Drive Belt 17 MT1501112YZMA
BUSHING, Idler Bracket 18 MT1501065MA
SPRING, Extension Idler 19 MT53704MA
IDLER, Plastic Ball Bearing 20 MT1502120MA
NUT, Hex Jam, 3/8-16 21 MT1917421SM
CARRIAGE BOLT, 3/8-16 x 1-1/4 22 MT585781MA
IDLER ASSEMBLY, Auger 23 MT1501628YZMA
SPACER, Auger Idler 24 MT1502041MA
WASHER, 1/2 25 MT1960027SM
BRACKET & HUB ASSEMBLY, Spring 26 MT1733451SM
PIN, Hair 27 MT711682MA
PIN, Clevis 28 MT1735135MA
PANEL, Bottom 29 MT1740906ASM
SCREW, Hex Washer Head Taptite, 1/4-20 x 5/8 30 MT1927429SM
SPRING, Extension Auger Idler 31 MT165X159MA
FRAME BOX 32 MT1501666E511MA
PLATE, Engine Mount 33 MT1733583FSM
SCREW, Hex Washer Head Taptite, 5/16-18 x 1/2 34 MT1924856SM
SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 35 MT1664847SM
COVER, Belt w/Toolbox Includes Decal 36 MT1732486SM
SCREW, Hex 39 MT26X306MA
Note* See your local Briggs & Stratton distributor for parts and service.
The above parts group applies to the following Mfg. Nos.:
2007
9
© Copyright by Briggs and Stratton Corporation
1695321 - ST1028S
1695322 - ST1130S
1695323 - ST1332S
TP 400-4677-02-LW-T
To Next Page
Loading...
Need help?
General
