*All products subjected to fall arresting
forces should be removed from service
immediately!
DECK/FLOOR/GROUND LEVEL
WORK SURFACE
WORK SURFACE
(ANCHOR POINT)
MINIMUM CLEARANCE 3ft (1m)
*The user shall be equipped with a means of
limiting the maximum dynamic forces exerted
on the user during the arrest of a fall to a
maximum of 8 kN (1800-lbf). In the EU these
forces must be limited to 6 kN (1350-lbf).
WARNING!!! SWING FALLS MAY OCCUR WHEN THE WORKER IS NOT DIRECTLY UNDER ANCHOR POINT.
Inspect retaining
bushing for wear
or damage.
To Next Page
Loading...
