EasyManua.ls Logo

FRP DB002 - Preparation Before Start-up; Equipment Inspection; Refueling Procedure; Air Filter Maintenance

FRP DB002
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
1. Inspect equipment
Check all bolts & nuts,brakes,engine etc.
2. Refuel
Use the mixture of the gasoline and the two-stroke engine oil. The
volume ratio is 25:1. Use a clean and special fuel glass and
grasp cap to shake in more than 30 seconds. Don’t use mixture
oil in more than 1 month.
3. Check and clean the air lter
The air lter must be often cleaned, or the polluted air lter will
lower the out put power of the engine. If the air lter is blocked
by dust, use gasoline to clean the air lter, then dip in the oil,
wring oil out and put the air lter back.
1:25
FC two-stroke engine oil90#gasoline
04Preparation
Before Start-up