EasyManuals Logo

FrSky XJT Lite User Manual

FrSky XJT Lite
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Manual for FrSky XJT Lite Module
Specifications
Dimension: 62.4mm × 30mm×14.5mm (L×W×H)
Weight: 20g
Channel: 16CH
Operating Voltage Range: DC 6.5V~8.4V
Operating Current: 100mA@7.2V Typ
Upgrade Interface: Smart Port
Introduction
FrSky XJT Lite module is a 2.4GHz frequency system which is especially designed for FrSky Taranis series
transmitter like X Lite S/Pro and X9 Lite. In addition, it gets low latency and high precision thanks to the upgraded
digital interface and high-speed data transmission. This being the “Lite” version works perfectly with all FrSky
receivers in the ACCST D16(Non-LBT), D8, LR12.
Features
High-speed digital module interface
Telemetry data transmission supported
Binding Procedure
Binding is the process of uniquely associating a particular receiver to a transmitter module. A transmitter module can
be bound to multiple receivers (not to be used simultaneously). A receiver can only be bound to one transmitter
module. Follow the steps below to finish the binding procedure.
1.
For Taranis X-Lite Pro as an example, turn on the transmitter, go to the MENU-MODEL SETUP-PAGE 2, choose
External RF-Mode XJT Lite D16 or D8/LR12. then select [Bnd].
2.
Connect the battery to the receiver while holding the F/S button on the receiver. The RED LED on the receiver
will flash, indicating the binding process is completed (please refer to the corresponding receiver
s instruction
manual for details).
3.
Turn off both the transmitter the receiver.
4.
Turn on the transmitter and connect the battery to the receiver. The GREEN LED on the receiver indicates the
receiver is receiving commands from the transmitter. The receiver/transmitter module binding will not have to be
repeated, unless on of the two is replaced.
Mode of XJT Lite
D8
D16 (Non-LBT)
LR12
Compatible Receiver
V8-II series receivers (V8FR-II,V8R7-II,V84R-II,VD5M,etc.)
D series receiver (D8R-II plus,D8R-XP,D6FR,D4R-II,etc.)
X series non-LBT rceiver(X8R,X4R,etc.)
L series receiver (L9R,etc.)
Green LED
Flashing
Flashing
ON
RED LED
ON
OFF
Flashing
Status
Normal
Range Check
Binding
Overview
30
62.4
14.5
41.9
9.8
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us: frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FrSky XJT Lite and is the answer not in the manual?

FrSky XJT Lite Specifications

General IconGeneral
BrandFrSky
ModelXJT Lite
CategoryControl Unit
LanguageEnglish

Related product manuals