Fryette C-5084-T User Manual

PITTBULL FORTY- FIVE 1X12 COMBO MODEL C-5084-T
SUPER THIRTY COMBO MODEL C-3084-S
REVISED 05/09/05
FRONT PANEL FUNCTIONS, LEFT TO RIGHT
1. INPUT HIGH
- High sensitivity input (also has a brighter tone)
2. INPUT LOW
- Low sensitivity input (also has a slightly darker tone)
3. GAIN
- Amount of overdrive. Initial set-up: 2 O’clock
4. DRIVE
- Toggles between Drive and Clean channel
5. VOLUME
- Pre FX loop. Initial set-up: 10 O’clock
6. BOOST
- Switches from low gain (clean to slightly dirty) to medium gain (crunch to medium
overdrive)
7. TREBLE
- Initial set-up: 2 O’clock
8. EDGE
- Frequency dependent gain boost; gain increases as you play up the neck.
9. MIDDLE
- Initial set-up: 10 O’clock
10. SHIFT
- Shifts Treble, Middle, and Bass shelving down
11. BASS
- Initial set-up: 12 O’clock
12. VOLUME
- Gain and volume for Clean channel, pre FX loop. Initial set-up: 9 O’clock
13. BOOST
- Gain boost for Clean channel
14. TREBLE
- Initial set-up: 2 O’clock
15. BRIGHT
- High frequency boost ( becomes less active as Volume increases)
16. MIDDLE
- Initial set-up: 10 O’clock
17. SHIFT
- Low midrange boost between Middle and Bass frequencies
18. BASS
- Initial set-up: 12 O’clock
19. STANDBY
- 1=operate , 0= standby
20. MAINS
- Lovely emerald green, don’t you think?

Fryette C-5084-T Specifications

General

Brand	Fryette
Model	C-5084-T
Category	Amplifier
Language	English

Summary

Front Panel Functions: Drive Channel Controls

Input Jacks

High and low sensitivity inputs for tone selection.

Drive Channel Gain and Tone Shaping

Controls for Gain, Drive, Volume, Boost, Treble, Edge, Middle, Shift, and Bass.

Front Panel Functions: Clean Channel Controls

Clean Channel Volume and Tone

Volume, Boost, Treble, Bright, Middle, Shift, Bass controls for the Clean channel.

Front Panel Power Controls

Standby and Mains Switches

Controls for operating state and main power indicator.

Front Panel Functions: Right Side Controls

Reverb and Effects Loop Controls

Controls for Reverb, Effects Mix/Level, Send, Loop Level, and Series/Parallel operation.

Output and Configuration Settings

Line Out, Speaker Output, Impedance Select, and Class A/AB switch.

Fuses and Ground Switch

Information on Mains Fuse and Ground Switch settings.

Tube Function and Location Chart

Tube Layout and Descriptions

Details on each 12AX7 section, AT7, EL84, and 5AR4 tube functions and locations.

Limited Warranty Information

Warranty Coverage and Exclusions

Details on 5-year warranty, 90-day tube/fuse/speaker warranty, and exclusions.

Warranty Registration and Contact

Instructions for registering the product and contact information for Steven Fryette Design.