Need help?Do you have a question about the FS PoE+ Series and is the answer not in the manual?
General| Dimensions | varies by model |
|---|---|
| Weight | varies by model |
| PoE Standard | IEEE 802.3af |
| VLANs | Up to 4094 |
| QoS | Yes |
| Management | CLI |
| Operating Temperature | 0°C to 40°C |
| Mounting | Rack-mountable |
| Storage Temperature | -40°C to 70°C |
| Jumbo Frame | Up to 9216 bytes |
Describes how physical port numbers are formatted and lists interface types, purposes, and slot numbering conventions.
Outlines essential steps to confirm before configuring the switch after powering it on, including hardware setup.
Explains how to use question marks or direction keys to obtain command information and view available commands.
Details the different command modes available on the switch, their prompts, and how to navigate between them.
Explains how to cancel a command or revert to default attributes, typically by using the 'no' keyword.
Instructs on how to save configuration changes using the 'write' command to prevent data loss during restarts.
To Next Page
