Need help?Do you have a question about the FSIP FS Series and is the answer not in the manual?
General| Brand | FSIP |
|---|---|
| Model | FS Series |
| Category | Controller |
| Language | English |
Adjustable function for smooth acceleration on vehicles of varying weights and speeds.
Adjustable function for self-protection of control and traction motor.
Circuit reduces output to maintain component temperature, reducing switching frequency at ~60°C.
Assures accelerator is calling for low speed operation at start up.
Adjustable function for smooth braking on vehicles of varying weights and speeds.
Provides oscillation frequency of 13 kHz for quieter operation and less motor heating.
Disables control if battery connections are reversed (with Line Contactor and Diode).
Control designed for use down to specific cutout voltages based on system voltage.
Breakdown of arguments for configuring the part number.
Adjust potentiometer CW to increase current limit, 50%-100% of rating.
Adjust potentiometer CW to increase acceleration ramp, 0.5-5 seconds.
Adjust potentiometer CW for smooth forward/reverse transition, 10%-100% of limit.
Wiring diagram for electric vehicles with F & R Contactors, Hold Off option.
Wiring diagram for golf cars with F & R switch, no Hold Off option.
Diagram for EZGO Golf Car wiring with F & R switch using ITS Converter.
Wiring for pump or soft start applications, applies to NNNS type controller.
Details of the original 8-pin vehicle connector pin assignments.
Pinout details for the ITS converter connections.
To Next Page